Reinforced Kevlar Edge Corrugator Belt

1. Description :

Reinforced kevlar Edge Corrugator Belt When the corrugated board production line is running,due to the corrugator belt with the hot plate touching directly,

so the surface temperature of corrugator belt will be rise 40% than original temperature,

In order to improve the temperature and wear strength of the belt, the edge of corrugator belt will be weaving high temperature and wear-resistant special fiber: Aramid fiber.

while ensuring the performance of the belt, also greatly enhanced resistance to wear and Abrasion resistance.

we can also supply Corrugating belts, Woven Corrugator Belts,Corrugated Traction Belt, Double Facer Belt, Corrugation felt

2. Reinforced kevlar Edge Corrugator Belt Feature

1. Suitable as top belt with high speed (above 150m/min ) production

2. Heat and Super tear resistance

3. Inwoven Aramid edge to reinforce the belts ,reduce wear substantially and ensure a longlife time .

4. Particularly for frequent changes of board width

5. More Popular in the all corrugators plant.

3. Reinforced kevlar Edge Corrugator Belt Specification

Product	Inwoven Aramid Edge Belt - kevlar edge
Thickness	9mm
Width range	1000mm - 3200mm
Length	80 meters
Heat-resistance	240℃ (the kevlar edge up to 350℃)
Tensile strength	70Mpa
Coefficient of friction	≥ 0.40µ
Weight per unit	(7.5±0.3)kg/㎡
Air-permeability 40mm water Column	2.0m³/㎡ min
Seam	Hot JAW lacing/Clipper with rubber coated
Edge	100mm or 200mm inwoven aramid edge reinforcement (kevlar)
Suitable position	Top belt
Lifetime	80 million meter
Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise

4. Reinforced kevlar Edge Corrugator Belt Clipper

Clipper -- All the clipper import from American Fasteners

Hot Jaw Lacing & Clipper With Rubber Coated

5.Safety& Solid Packing

Light package for air shipment, beautiful and save cost of freight fee– woven bag

Safe package for sea shipment, mainly woven bag for inner package, and fumigation free wooden box for outer package ,

also can design the package according to customer`s request.

6. How To Cleaning Maintenance Of Corrugator Belt?

It is better to thoroughly clean the corrugator belt once time per month.

Here are some detail steps:

1. Keep the machine running with slow speed;

2. Make the corrugator belt fully moist by water or low pressure steam spray with much water content;

3. Put into some detergent and clear up the dirt & paste scar with soft brush;

4. After cleaning,using water to wash the belt again;

5. During the washing process,it will be greatly help to lay out shallow U-shaped iron plate or shallow groove under the corrugator belt.

It will make the cleaning water flow out to the machine outside,keep the heating panel clear and no any corrosion;

6. When necessary, you can turn on steam to heat the heating panel and make the wet corrugator belt drying with slow speed.

Contact us if you need more details on Kevlar Corrugated Blanket. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cardboard Belt with Kevlar Edge、Corrugated Blanket for Corrugators. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Industrial Belts > Woven Corrugator Belts